Outdoor String Lights Not Working — How to Diagnose & Fix (2024)

You have just spent the day hanging string lights over your patio space. You took the time to ensure you hung them perfectly: no sagging, excellent ambiance. They look great — but disaster strikes when it’s time to turn them in.

One flick of a switch is all it takes to realize that your light bulbs aren’t turning on! The situation may be especially confusing because you might have a memory of them working last season. So, why are your string lights not working, and what can you do to fix it?

There are several reasons why your string lights are not working correctly. The most common problems are burned-out bulbs, a faulty electrical outlet, a bad electrical connection, a power supply issue, or damaged wires within the string lights. Luckily, this is easy to fix and relatively cheap to replace.

Read on to learn more about these common problems and what you can do to help remedy them.

Diagnosing the issue

There are many reasons why your string lights are not working. However, you don’t want to electrocute yourself trying to diagnose why it’s happening.

The very first thing you should do is unplug the lights from the power source. Don’t do anything else until you finish this. Seriously, don’t play around with electricity. An average of 411 workers are electrocuted each year.

Next, check for anything that would also be a safety concern. These include exposed wires, broken fuse boxes, and bulb burns. Leave no bulb unturned, and again, be careful.

Outdoor String Lights Not Working — How to Diagnose & Fix (1)

Check the power — GFCI & breakers

It is essential to check for bare wires and an open socket to prevent electric shock when working with lights. In addition to inspecting the lights, it is crucial to have the proper outlets and connections in place.

GCFI outlets are a nonnegotiable safety precaution for outdoor lights and any outlets near water like bathrooms and kitchens indoors. Of course, you can get many outdoor lights wet, but a GCFI outlet provides unparalleled peace of mind.

The benefit is that GCFI outlets will blow a circuit if they come in contact with water or wet weather. In addition, they help prevent electric shock or fire from sparking at the outlet.

Check your fuse box if you think your lights have blown a fuse box. GFCI outlets have a reset breaker right on their faces for easy access. If your GFCI outlets become damaged, replacing them is the only safe option.

Do not try fixing or repairing a damaged or burnt outlet or fuse unless you have adequate training and comfort.

Inspect the strand

Be sure to check your strand of string lights for burned-out bulbs. Repeatedly burnt-out bulbs can be an indicator of a more significant problem.

If you notice many burned-out bulbs, you could have an electric issue on your hands. Certain bulbs could be getting more electricity than others, causing them to burn out quicker.

Also, check the strand for broken light bulbs. Small broken light bulbs can cause problems within your strand of Christmas lights, causing only part of the strand to light up properly. Even if only one bulb is broken, it can cause the whole string of lights not to light up.

Check the strand for exposed or loose wires. A bad connection can cause issues with your power supply and bulbs.

How to Fix String Lights

Outdoor String Lights Not Working — How to Diagnose & Fix (2)

When All of the Lights Won’t Turn On

We have all heard the phrase, “one bad bulb ruins the whole strand.”

If your entire string of lights won’t turn on, begin by checking for a problem bulb. You can use a light tester on your string lights to check for the faulty bulb.

If you use LED light strings for your lights, and none of the lights work, you could have a severely damaged bulb. If a bulb on an led light string goes out but is still attached to the series, the lights will continue to glow, leaving only the damaged bulb dark.

However, if the bulb has a severely damaged shunt, there is a good chance the entire strand will not turn on. Replace the specific bulb of the burnt-out Christmas light.

When you plug the light string back into the outlet, the entire strand of Christmas lights should light up again.

When Half of the Lights Won’t Turn On

A lot of people prefer LED lights on strands of string lights. This preference makes sense: LED string lights are simple, easy to care for, and require less electricity than incandescent lights.

However, when one bulb goes out on the string, it can take the other half.

If a bulb has gone out, the most straightforward fix is to replace the bad bulb. When you repair the single bad bulb, the rest of the strand should light back up.

When the Bulbs Keep Blowing

Wires within Christmas lights heat up as electrical current runs through them. If the wire gets too hot, fuses will blow a circuit to prevent any more electricity from entering the light set.

To help prevent blowing the electrical circuit, choose lighting fixtures designed for your space.

Only use outdoor-rated light strands when decorating the outside of your home. These lights are safe even in heavy rainfall and snow.

When the String Lights are Flickering

If you notice your string lights are flickering or going dark for a few seconds before returning to full light, there may be a problem with your string light fuses.

Flickering is caused by the electrical current running through the light strands of wires and into the bulb. If the conductivity isn’t optimal, your string lights will flicker as if they are going out.

The first step is to ensure that all the bulbs are screwed in tightly to their socket. Next, use your fingers to check for loose or wiggly bulbs throughout the strand of lights.

Once all the bulbs are secured to their socket, plug in the lighting fixture to test your work. If the lights do not flicker anymore, you know you have found a way to fix your Christmas lights.

Outdoor String Lights Not Working — How to Diagnose & Fix (3)

Buying Replacements

Sometimes, after diagnostics are complete, you’re left with a string of lights and still don’t quite know why they’re busted.

In that case, your only option is to buy a new set. I can’t tell you what to buy to replace, but you can definitely find an assortment on online retailers like Amazon — click here to see their inventory.

Outdoor String Lights Not Working — How to Diagnose & Fix (2024)

FAQs

Outdoor String Lights Not Working — How to Diagnose & Fix? ›

Wiring: It's possible that the wiring in the string has been damaged, which could cause it to fail. Check the wiring for any breaks or damage, and replace any damaged sections. Storage: If the lights were not stored properly, they may have been damaged or exposed to moisture, which could cause them to fail.

Why would outdoor string lights stop working? ›

Wiring: It's possible that the wiring in the string has been damaged, which could cause it to fail. Check the wiring for any breaks or damage, and replace any damaged sections. Storage: If the lights were not stored properly, they may have been damaged or exposed to moisture, which could cause them to fail.

How to tell which bulb is out on a string of lights? ›

Simply bring the light tester close to each bulb. The tester's indicator will light up when it's near a functioning bulb. If you have a non-contact voltage detector, bring the detector close to the wire section between each bulb to test for voltage. The dead section of wire will be the section after your bad bulb.

How to make string lights work again? ›

How to Fix a String of Christmas Lights
  1. Diagnose the problem. Carefully inspect each string of lights before plugging it into an electrical outlet. ...
  2. Find the bad bulb, and swap it out. ...
  3. Fix the faulty filament or shunt. ...
  4. Replace the fried fuse. ...
  5. Upgrade your lights.
Oct 19, 2021

How do you troubleshoot a string of lights? ›

Check for Burnt-Out Bulbs
  1. Ensure each bulb is seated properly and fully in its socket.
  2. If a bulb's glass is darkened around a broken filament, it's a sure sign it's burned out.
  3. Unplug the strand and replace the bad bulb with a new bulb of the same size and the same voltage rating.

Why did all my outside lights stop working? ›

Tripped Circuit Breaker

If there are any flipped circuits, that could be a reason the outdoor lights aren't working. You could have a blown breaker or fuse if you don't see any flipped. With circuit issues, you should contact an electrician immediately to ensure proper safety measures are taken.

Do outdoor string lights have a fuse? ›

Many people do not realize that some string lights come with fuses. Fuses are important safety features that can prevent overheating, electrical damage and even fires should there be a malfunction in your string lights or electrical system.

How do you test outdoor string lights? ›

The most convenient way to test for faulty bulbs in a light string is through the use of a light tester. Light testers search for the point in the string where the voltage changes between a good bulb with current flowing and a problem area with minimal current.

Why is my whole strand of lights not working? ›

The most common cause for a strand of malfunctioning holiday lights is a burnt-out, broken or loose bulb. Frayed or broken wires can also cause your lights to fail, so be sure to check that the cords are in good shape.

How to reset string lights? ›

To reset your Outdoor String Lights, hold the power button on the controller for 10 seconds while the device is plugged in and powered on. The string lights will flash red 3 times after a successful reboot. After this reset, starting the pairing process again.

Why won't my outdoor string lights work? ›

String lights often have fuses tucked inside the male plug end. To check the fuse, plug the broken lights into an electrical outlet that you know has power. Then, take a working string of lights and plug it into the broken set. If the lights on the second strand don't light up either, the fuse is likely the issue.

How do you tell which bulb is out on a string of lights? ›

Incandescent Lights

You just hold the tester up to each bulb, see if its light comes on to indicate a working bulb, then move on. When it doesn't light up, it means the bulb is bad and should be replaced. Use caution when removing a broken bulb from your string lights.

Why is half of my outdoor string lights not working? ›

If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way down, wiggling them to check for looseness. If it flickers, that's your cue to replace it.

How long should outdoor string lights last? ›

The best way to know how long lights will last is to look at the hour rating. For example, if the LED rope lights or bulbs you're considering have a rating of 50,000 hours, that means they'll last for about five and half years. And that's if you plan to leave them on 24 hours a day.

Why did my LED lights stop working all of a sudden? ›

One common reason LED lights may not turn on is due to a faulty power source. Please check if your LED lights are plugged in and that the power source is functioning normally. Additionally, check the power cord for damages or loose connections. Another reason LED lights may not turn on is due to a faulty LED bulb.

References

Top Articles
Latest Posts
Article information

Author: Otha Schamberger

Last Updated:

Views: 5754

Rating: 4.4 / 5 (55 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Otha Schamberger

Birthday: 1999-08-15

Address: Suite 490 606 Hammes Ferry, Carterhaven, IL 62290

Phone: +8557035444877

Job: Forward IT Agent

Hobby: Fishing, Flying, Jewelry making, Digital arts, Sand art, Parkour, tabletop games

Introduction: My name is Otha Schamberger, I am a vast, good, healthy, cheerful, energetic, gorgeous, magnificent person who loves writing and wants to share my knowledge and understanding with you.