Giant Yorkshire Pudding Recipe (2024)

Ratings

4

out of 5

887

user ratings

Your rating

or to rate this recipe.

Have you cooked this?

or to mark this recipe as cooked.

Private Notes

Leave a Private Note on this recipe and see it here.

Cooking Notes

patty

We always had a standing rib roast for New Year's Dinner each year. I would watch my mother gather the ingredients on the kitchen table hours before mixing them so that they could come to room temperature. I followed my mother's instructions and never had a problem producing a perfect pudding. I don't see this note in recipes anymore - bring all ingredients to room temperature.

Zaphelps

I usually don’t have enough drippings to make this AND gravy (which is the most important thing about the meal) so I put a dollop of reserved bacon fat (I save it like a miser) into a large round pie plate and let it heat along with the oven. I make a smaller Yorkshire Pud with 2 eggs, 1 cup of milk, 1cup of flour and a pinch of salt Don’t over mix it, just let a few lumps remain. Carefully pull the pie plate out and pour in the batter. 15 to 20 minutes should be enough at 450F

Michael B

I make the batter the day before and let it rest in the refrigerator overnight. I find the texture improves - and it is one less thing to be having to do as a meal is coming together. You can also make individual Yorkshire puddings by putting drippings into individual muffin tins - and also, thereby, accommodate any late arrivals with a fresh pudding to accompany their roast

Joyce Vining Morgan

Been making Yorkshire pud like this for 50 years, under the instructions of my British mother-in-law. Always perfect.

Gerry

My Mum's recipe - tried and tested over 70 years12 part mini pie pan. Pan drippings from roast, bacon or a little oil1 eggpinch salt1/4 cup plain flour - level1/4 cup cold milk1 eggdash ice waterWhisk together - consistency of heavy cream. Refrigerate several hours.Heat the fat in the mini pie pans at 450F until really hot.Add the dash of water to Yorkshire batter - whisk. Carefully pour in batter. Return to oven. Turn down to 400 bake 20 minutes - do not open oven door during baking.

Meredith

Pouring the drippings into the pan before adding in the batter instead of mixing any into the batter itself usually yields a better crust around the outside and a less custardy base.

John Gould

Use 12" cast iron skillet

Figaro

Over 70 years of practice, this works: 1½ cups flour, ½ tsp baking powder, 1 tsp salt, 1½ cups milk, 3 eggs, 1/3 cup beef drippings, pinch nutmeg, pinch cayenne pepperSift together dry ingredients. Add milk gradually to form a smooth paste. Add eggs, one at a time; beat well after each addition. Preheat oven to 350⁰. In 12" heavy pan, heat drippings to sizzling hot on stove top. Pour in batter. Bake 30-40 min until puffed and brown–Do not open oven door.The baking powder is insurance.

Josie

I made Yorkshire puddings just the other day using bobs redmil gluten free flour 1 to 1 and then just followed the recipe it worked brilliantly

Ben

Halve the recipe and it is perfectly sized for a standard 9" pie dish. At that size, it only takes 20-25 min at 425 to bake through.

jmee

Yorkshire Pudding is a family tradition. I proudly inherited the pan my grandmother and mother swore by. They insisted the best batter is made in a blender then allowed to sit at room temperature for 30 minutes or more. While I don't eat much meat anymore, I still love thinking about them and the many years of enjoying Yorkshire Pudding when I make the Dutch Baby version using butter instead of meat fat. Simply divine.

Meredith

My family finds that 5/8 of a cup of drippings works well in the 9x17 roasting pan once the beef has been removed from it to rest and the excess poured off. Any more results in puddles of grease on the pudding.In the strange event that there are leftovers, we recommend reheating either in a frying pan or toaster oven.

hilary

Let the eggs and milk sit at room temperature before combining, then cover batter w plastic wrap and let sit for at least an hour. Have found pudding to be fluffier as a result

Gail Granger

Add cooked, cut up sausages to the batter before baking, and voila . . Toad in the Hole.

Elaine

I agree that ingredients brought to room temperature tend to work well. I've got a chiffon cake cooling on the counter as I write, and it went together particularly well I think because I got all the ingredients out early this morning and didn't bake the cake until early afternoon. I always try to bring egg whites to room temp, and meat I'm planning for dinner. What's everyone's view of this?

Ims

I let the batter rest for an hour at room temp. Not sure if it was related but holy moly, this rose up out of the pan like it had a mind of its own! Delicious too.

JDK

Staying in an Air BnB with no muffin or popover tins available, I was delighted to find this recipe that allowed me to serve Yorkshire pudding with our beef roast at Christmas. The result was fabulous, if not hilarious. The pudding rose so much that it hit the next rack above it and we had to peel it off the slats! It was fun to open the oven and see the heights the pudding had attained. Next time I will reduce the cook time by 4-5 minutes but it was delicious this time!

krogers

I made this with cashew milk and olive oil. I forgot to turn down the oven so it was done about 15 minutes early. But the bread had a nice crunch, got a good amount of lift, and was pretty delicious. Not exactly like yorkshire with whole milk, but a close second for those who cannot tolerate dairy.

Tessa

Heat pan until warmed, NOT until hot. If you pour room temp batter into a preheated Pyrex pan, you are likely to crack or shatter the pan.

Hif

Watch cooking times, as my pudding was done after 25-30 minutes. Great recipe. However, I would add a touch more salt to the batter.

Gerry O

A total disaster! Only please follow the Joy of Cooking recipe!

Dutch Baby?

How is this different from an Oven Pancake / Dutch Baby without sugar?

Roberta

Alex—the recipe allows melted butter

Alix

QUESTION:What could I use instead of Beef Drippings (I'll not be cooking a beef roast soon --or ever)

Alisha

Attempted in a cast iron skillet. Couldn't get it to rise properly. Bummer!

Alice Olson

Will someone please tell me how this is served? Do you cut into pieces? Do you rip it into pieces or do you put it on the table and let guests just pull off their own piece? Surprised nothing is said about this; maybe I'm the only reader here for whom the answer isn't obvious. Thanks.

Anne

Coming from British descent.. my mother and her mother made a very similar recipe, but always cooked the pudding in the roasting pan. To be honest, it would stick in spots, but those scrapings were the BEST!! We never have gravy with Prime Rib, only au jus, which you can easily separate from the fat (which you leave in the pan). For pork roast, the British way was to scrape the bottom of the roast pan with crusty bread! And, before you comment, Grandma lived to 87+ years, loved every minute.

kmj

Because careful not to over mix.

BARB next time you are in toronto,pick up some motts clamato luice, makes a Manhattan clam chowder

this can be done in custard cups heated in hot oven 450, each tin,muffin or custard glass cups on a cookie sheet 450 15 min, 350 15 min they should be puffed and crisp........;fill with gravy

tom

This was the best ever. Will become our standard operating procedure.

Private notes are only visible to you.

Giant Yorkshire Pudding Recipe (2024)

FAQs

What is the secret to good Yorkshire pudding? ›

Resting the batter overnight is key for developing better flavor. Forget about cold batter: letting it rest at room temperature helps it rise taller as it bakes. A combination of milk and water gives the Yorkshire puddings extra rise and crispness.

What is the best oil or fat for Yorkshire puddings? ›

Cold batter and hot oil are the successful combination for a well risen and crisp pudding. Make sure your Rapeseed Oil is smoking hot before pouring your batter into the tin. It's the best oil for the job.

How to get a good rise on Yorkshire pudding? ›

In Gordon Ramsay's restaurant, they make the Yorkshire pudding recipe batter the night before and leave it at room temperature until it's needed the following day. You don't need to do this, but make sure you rest yours for at least an hour before you cook to ensure a good rise and deliciously light puddings.

Can you put too much oil in Yorkshire pudding? ›

This is about the oil. As mentioned, you need the oil to be very hot before adding your batter, but it's also important to use the right amount. Too much will make the bottom of your Yorkshires greasy, while too little could see your puds stick to the pan.

Do more eggs make Yorkshire puddings rise? ›

Yorkshire puddings don't need baking powder or other raising agent, the secret to a good rise is plenty of eggs, hot fat and a hot oven.

Is it best to let Yorkshire pudding batter rest? ›

While it doesn't need to be cold, your batter should have time to rest. Our no-fail yorkies recipe recommends transferring your batter to a jug after mixing, then leaving it to rest for at least 15 minutes.

Should Yorkshire pudding batter be thick or runny? ›

What consistency should Yorkshire pudding mix be? For perfect Yorkies, you need a consistency of heavy cream, so really quite runny but not milk-runny. To make sure you achieve this I suggest pouring half of the liquid in and then slowly adding more until you reach the consistency.

What type of milk is best for Yorkshire puddings? ›

James Martin shares his recipe for making Yorkshire Puddings

“[You need] Plain flour - eight ounces, eight eggs, and a pint of full-fat milk, never ever semi-skimmed.”

Why is my Yorkshire pudding not fluffy? ›

One of the main reasons why Yorkshires don't rise is because the oil isn't hot enough, so make sure it's bubbling and sizzling as you pour your batter in. Make sure you aren't over-filling the tin – fill each hole about a third or halfway up, any more and they may collapse through the weight of batter.

What happens if you put too much flour in Yorkshire puddings? ›

If you use too much flour, the resulting pudding will be heavy and dense. Without enough egg, there will be insufficient air beaten in for a successful rise. Too much milk will make the batter too loose.

What is Yorkshire pudding called in America? ›

History. The popover is an American version of Yorkshire pudding and similar batter puddings made in England since the 17th century, The oldest known reference to popovers dates to 1850. The first cookbook to print a recipe for popovers was in 1876.

Who makes the best Yorkshire puddings? ›

WINNER: M&S 6 Yorkshire Puddings

These golden Yorkshire puddings have the slightly sweet, doughy smell of fried batter. Their savoury, bready taste has a touch of the sweetness too and they're the perfect carrier for a meaty main and rich gravy.

How to tell if oil is hot enough for Yorkshire pudding? ›

At the oven (this is safer than carrying a tin of hot oil across the kitchen), carefully pour some batter into the middle of the oil in each hole, remembering that it is very hot. Watch out as the oil will sizzle a bit as the batter hits it.

How to stop Yorkshire pudding sinking after cooking? ›

To prevent your Yorkshire puddings from sinking, don't open the oven door before the end of cooking time. When you remove the tin from the oven, do not leave the puddings near any drafts. The most foolproof way to stop your puddings from sinking? Eat them straight away!

Why do my Yorkshire puddings go flat when I take them out of the oven? ›

It is almost always because the oil wasn't hot enough. Yorkshire Puddings rise because the water molecules in the milk turn to steam and as they rise, they force the batter upwards to make the puddings grow.

What causes Yorkshire puddings not to rise? ›

The fat isn't hot enough (it should be smoking hot). The oven isn't getting hot enough (needs to maintain a 220C/425F temperature). Your oven loses heat too quickly when you open the oven door and/or you leave the oven door open for too long whilst you're filling up the Yorkshire pudding tins with batter.

How do you make Yorkshire pudding less dense? ›

The general rule of thumb is that substituting some, or even half of the milk in your recipe for water will make your puddings lighter and crispier, so try this modification if your puds are too dense or soft. The amount of eggs that you use matters, too – use an equal amount of flour, eggs and milk or water.

How do I stop my Yorkshire puddings being stodgy? ›

Always use equal volumes of egg, milk, and all-purpose flour. If you use too much flour, the resulting pudding will be heavy and dense. Without enough egg, there will be insufficient air beaten in for a successful rise. Too much milk will make the batter too loose.

References

Top Articles
Latest Posts
Article information

Author: Roderick King

Last Updated:

Views: 5802

Rating: 4 / 5 (71 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Roderick King

Birthday: 1997-10-09

Address: 3782 Madge Knoll, East Dudley, MA 63913

Phone: +2521695290067

Job: Customer Sales Coordinator

Hobby: Gunsmithing, Embroidery, Parkour, Kitesurfing, Rock climbing, Sand art, Beekeeping

Introduction: My name is Roderick King, I am a cute, splendid, excited, perfect, gentle, funny, vivacious person who loves writing and wants to share my knowledge and understanding with you.